Hello Every one Welcome to my Blogger (KhmerueTeams.blogspot.com). Today I will teach you How to Flash All Model Samsung Brand with Stock Rom or Firmware.
To Flash Samsung you need 6 important things on your Computer.
- 1-Samsung Model and all Version Korea or Official global model, It is the same way of flashing.
- 2-Battery must over 50% to flash it.
- 3-USB cable should be working strong and good quality condition, USB cable have 4 line inside it. so make sure that all the 4 lines still working. and can transfer data very well. USB port also working fine as well.
- 4-Install Samsung USB Drivers. Samsung USB driver is all in one no need to choose which model or driver is... No need to find the same to your models. Click here to download this driver.
- 5- Back up your data and keep it, in your computer or sd card.
- 6- Download the Odin Software (recommended the latest version)
Before you Start to flash your devices.
Download the file that support your device for example : Samsung Galaxy Note III (SHV E250L) Is the Real name of your model. The files can be a zip, Tar, and md5. depending on the uploader! But that is not a problem because in the zip file is the real files inside it. so you can use Winrar or 7zip to extract it and keep it in one folder.
Note : Zip file can also flash directly from the SD Card Memory, but it's a different way of this tutorials and the inside file is not a TAR or MD5. It's a Image burn files.
How to Flash or Write stock Rom into your devices.
- 1- First you need to make your phone go to download mode. Remove battery about 10 seconds and plug it back, but don't turn on the phone or plug the USB cable, so keep the phone turn off.
- 2-Pres and hold the 3 buttons at the same time! Voldown + Home + Power key. (You should press Voldown + Home key First and then Press Power Key.
After you press correct way like the screen shot above, The green screen and text will appearing and show all information about your devices. Now Go a head and click Vol/down the other screen will appearing as shown below.
You can now Flash your phone with Stock Rom and Firmware. So please insert the USB cable to your PC (Computer) and plug it to the phone charger port. You will see the driver is installing at the right bottom of the Computer screen. so please wait until it completely install is finished. It's showing this for the first times with download mode only. the second times when you plug and unplug back, it's should not appearing again.
After it's has completely installed this driver you can now open the Odin software by double click on the the Odin exe file. And you should be seen the connecting between the phone and computer as the red circle below. When you seen this mark, this means your phone and computer are connecting very well. You can click on Image to enlarge it.
Now the Time to Add the Firmware or Stock Rom Files. The File is separated to 2 Main different parts.
1- One file should be a TAR or MD5 this type is compiled all 4 parts to one file. So if you have one files (Tar or MD5) You can insert it at the AP only.
2- (4 Files or Five files ) If you have 4 or 5 files you need to add one by one. For example in the screen shot below.
Here is the Example more info about the 4 or 5 files inside the folder.
- PDA/AP Version ...............
- CSC Version ...............
- MODEM/CP Version ..................
- Region .................
- Product Code .................
- Build Date .................
- Changelist .................
- OS Android 6..0.............
So how to insert the files. It's very simple, All files have the start name For Example (AP) The name starting with AP name. so insert in the AP Place in Odin. See Example below.
BL..............................................> BL (place)
AP..............................................> AP (place)
CP..............................................> CP (place)
CSC...........................................> CSC (place)
Important:
- 1. Don't try to check or uncheck text box mark (Tick Mark) if you don't know it clearly. recommended is keep all default.
- 2. The phone will be dead after flashing if you choose the wrong files and wrong model stock ROM or firmware.
- 3. The phone will dead if you have disconnected when it's flashing, or not completely flashed and disconnected.
0 comments:
Post a Comment